Academic Programmes
Corporate Relationships
 
arrow HoD’s Desk
arrow Department Profile
arrow Vision and Mission
arrow Milestones
arrow Infrastructure
arrow Faculty
arrow Laboratory Details
arrow Faculty Publications
arrow Research Supervisor and Scholars
arrow Research Projects and Patents
arrow Programme Organized
arrow Programme Attended by the Faculty
arrow Events Participated by the Students
arrow Workshop, Seminar and Training Attended by the Students
arrow Roll of Honour
arrow Placement Details
 
Department of Electronics & Communication Engineering
 
ELECTRONICS LABORATORY
 
Laboratory In-charge

Mrs. N. Karthikadevi, Assistant Professor / ECE

Technical Staff

Mr. G. Vijayakumar

 
Area of the laboratory: 11.58m×9.14m =105.84 Sq. m
 

Description:

  • Electronics laboratory has been well furnished with Regulated Power Supplies, Function Generators, Cathode Ray Oscilloscopes AND DSOs.
  • 18 Work Tables are facilitated in this laboratory
  • Each Work Table has proper protecting devices such as fuse and MCB.
  • Line Voltage is stabilized by 5 KVA stabilizers.
  • The electronics circuits are designed and the results are compared with theoretical values.
  • Simulation experiments are executed with PSPICE in ECE Computer Laboratory.
  • This laboratory covers all the Electronic Circuits and Devices related laboratory courses prescribed by Anna University.
 
Major Equipment’s Cost ofElectronics Lab: Rs.10,81,725
 
The following courses are conducted in this Laboratory.
 
Sl. No Course Codes Lab Course Name Class
1 EC8261 Circuits and Devices II Sem ECE
2 CS8382 Digital System III Sem CSE
3 EC8461 EC8461 Circuits Design and Simulation IV Sem ECE
 
 
MICROWAVE AND MICROPROCESSOR LABORATORY
 
Laboratory In-charge

Mr J. SakubarSadiq, Associate Professor/ECE

Technical Staff

Mr. M.Vetrivel

 
Area of the laboratory: 11.58m×9.14m =105.84 Sq. m
 
Description:
  • All the experimental kits and components are stored in the shelves and racks
  • There are 6 double sided work tables present in this laboratory
  • This laboratory covers the Microprocessor and Micro controller related laboratory courses and Optical& Microwave laboratory prescribed by Anna University
  • Each work table has proper protecting devices such as fuse and MCB.
  • Line Voltage is stabilized by 5 KVA stabilizers.
  • The lab consists of Scientific Microwave bench , Optical and Microwave Power meters and Two Single mode fiber kits.
Major Equipment’s Cost in Microprocessor and Micro controller lab & Optical &Microwave lab: Rs. 27,37,512
 
The following courses are conducted in this Laboratory.
 
Sl. No Course Codes Lab Course Name Class
1 EC8681 Microprocessor and Micro controller V Sem ECE
2 EC8681 Microprocessor and Micro controller V Sem CSE
3 EE8681 Microprocessor and Micro controller VI Sem EEE
4 EC8761 Advanced Communication VII Sem ECE
 
SIGNAL PROCESSING / NETWORKING / VLSI LABORATORY
 
Laboratory In-charge

Mr S. Praveen Samuel Washburn, Assistant Professor/ECE

Technical Staff

Mr. N. Sathees Kumar

 
Area of the laboratory: 13.37m ×9.14m =122.20 Sq. m
 

Description:

  • Signal Processing Laboratory has been well furnished with25 KVA stabilizer and UPS
  • There are 75 high configuration systems along with working tables facilitated in this laboratory
  • Work tablesarehaving proper protecting devices such as fuse and MCB
  • Each system is equipped with executedin ECE Computer Laboratory.
  • This laboratory also covers embedded internet connection and IIR work bench for Embedded lab.
  • Simulation experiments are system Lab, Computer Networks Lab,VLSI Design Lab, VLSI Laboratory I &VLSI Laboratory II courses prescribed by Anna University.
  • Configuration Details: Dell Optiplex 390 DT–Nseries Base Intel core i3 2100 processor, Intel H-61chipset motherboard 2GB DDR-3RAM,320 GB SATA HDD,Dell Keyboard& optical mouse,Dell 18.5” TFT Monitor free DOS Pre loaded.
  • Intel Core 2 Duo@2.93 GHz, Intel G41 Chipset Mother Board, 2GB DDR2@800 MHz RAM,320 GB@7200 rpm SATA HDD, Lenovo Keyboard, Lenovo Optical Mouse,Gigabit Ethernet Card, Micro Tower Cabinet, 18.5” TFT Color Monitor
  • This lab having Six number of Analog Discovery kits.
  • This lab consists of Licensed PSPICE, Xilinx, CADENCE and MATLAB.
  • This lab has upgraded as Advanced VLSI laboratory under AICTE MODROBS in the Academic year 18-19.
 
Major Equipment’s Cost in Signal Processing Lab : Rs76,05,337
 
The following courses are conducted in this Laboratory
 
Sl. No Course Codes Lab Course Name Class
1 VL5111 VLSI Laboratory I I Sem M.E
2 VL5211 VLSI Laboratory II II Sem M.E
3 EC8562 Digital Signal Processing V Sem ECE
4 EC8563 Communication Networks V Sem ECE
5 EC8661 VLSI Design Lab VI Sem ECE
6 EC8711 Embedded system Lab VII Sem ECE
 
 
COMMUNICATION LABORATORY
 
Laboratory In-charge Dr. A. Valanarasi, Associate Professor/ECE
Technical Staff Mrs.M.Uma
 
 
Area of the laboratory: 10.10m × 9.14m =92.31 Sq. m
 

Description:

  • All the experimental kits and components are stored in selves and racks
  • There are 9 double sided worktables present in this laboratory.
  • This laboratory is covering the Digital, Linear Integrated Circuits,Communication system laboratory courses prescribed by Anna University.
  • This lab consists of Communication trainer kits, RF Spectrum Analyser, CRO, AFO, DSO.
  • Each work table is having proper protecting devices such as fuse and MCB.
 
Major Equipment’s Cost in CommunicationLab:Rs. 22,20,395
 
The following courses are conducted in this Laboratory.
 
Sl. No Course Codes Lab Course Name Class
1 EC8361 Analog and Digital Circuits III SemECE
2 EC8462 Linear Integrated Circuits IV SemECE
3 EC8561 Communication Systems V Sem ECE
4 EE8461 Linear and Digital Integrated Circuits IVSemEEE
 
 
PROJECT LAB
 
Laboratory In-charge Dr.S.M.H. SithiShameemFathima ,Professor/CSE
Technical Staff Mr.M. Senthilnathan
 
Area of the laboratory: 10.10M×9.14M=92.31 Sq. m
 

Description:

  • This Laboratory contains CRO, DSO for analyzing signals.
  • It also contains Soldering facility for the electronic system designs
  • This Laboratory was established to encourage the students for doing projects and research works
  • All the experimental kits and components are stored in shelvesand racks
  • There are 9 double sided work tablespresent in this laboratory.
  • This laboratory is covering the Project work and mini Project laboratory courses prescribed by Anna University.
  • Each work table is having proper protecting devices such as fuse and MCB.
 
The following courses are conducted in this Laboratory.
 
Sl. No Course Codes Lab Course Name Class
1 - Mini project VI SemECE
2 EC8811 Project Work VIII Sem ECE
 
Sample Project;
 
GULLY POT MONITORING AND WASTE MANAGEMENT SYSTEM
 
ABSTRACT
 
In the present scenario pollution has a greater impact towards environmental crisis. Themajor part of the reason behind this is sewer and gully pot leakages, blockages and theirimproper disposal. In this project a low cost and power efficient system has been designed,developed and implemented to provide adequate warning by monitoring the gully level and incase of any blockage and leakage. This system consists of the gully pot unit which has atransducer, a controller to monitor the gully level. This information is then transmitted to thecommon collector called as a controller, which collects the similar information from all suchgully pot units. This information is then processed and loaded to the server which is in turnviewed by a browser. The sewer line is continuously monitored for toxicity, leakage andblockage by the system till the sewer disposal end.This gully pot monitoring system is morereliable, low in cost for implementation and maintenance, power efficient. It provides a safegreen environment.